Description
SharkBite 1/2″ Barb Insertx1/2″ MPT Straight Stop. It is made of chrome plated brass and is Lead-Free. This 1/4 turn lever handle stop is used with TV# 608933 Cinch Clamps, need Cinch Tool TV# 608743, or copper crimp rings on cross link polyethylene PEX tubing. After crimping, you can test each fitting to well over 100 PSI. NSF listed brass inserts, ASTM F-876, ASTM F-877 to SDR-9 dimensional standards, NSF 14 & 61 for use in potable water systems, CSA B137.5 standards, NSF CL-R certified for use in hot water systems where chlorinated 140 degrees Fahrenheit hot water can be constantly re-circulated. The wetted surface of this product contacted by consumable water contains less than 1/4 of 1 percent, 0.25%, of lead by weight, meets AB1953 California & VT S152 Vermont low lead restrictions.
1/2 in. Barb Insert x 1/2 in. Male Pipe Thread Straight Stop
Made of chrome plated brass
Lead free
1/4 turn lever handle
Used with TV# 608933 Cinch Clamps, need Cinch Tool TV# 608743, or copper crimp rings on cross link polyethylene PEX tubing
After crimping, you can test each fitting to well over 100 PSI
Has NSF listed brass inserts, ASTM F-876, ASTM F-877 to SDR-9 dimensional standards, NSF 14 & 61 for use in potable water systems, CSA B137.5 standards, NSF CL-R certified for use in hot water systems where chlorinated 140 degrees Fahrenheit hot water can
WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
Reviews
There are no reviews yet.